Maintenance And Cleaning; Disposal - Durst Omega 2 Operating Instructions Manual

Omega 2
2004 – 2014 © Durst Phototechnik AG – www.durst-online.com, Omega 2, Issued 07/2014

11 Maintenance and cleaning

If the service work is not carried out sufficiently, all warranty and
guarantee claims are null and void.
 Apart from the activities described in the chapter entitled "Service", the
customer may not perform maintenance or cleaning work. Regular and
additional special service may only be performed by authorized Durst
service technicians.
 Only spare parts and consumable media which have been specially
developed and optimized by Durst may be used.
 When cleaning the housing or workstation, the printer and workstation
must be switched off and de-energized via the power isolator.
 The housing may only be cleaned with a lightly moistened cloth or a
dust brush.
 Under no circumstances may cleaning agents end up on the interior of
the printer or workstation.

12 Disposal

 Tools and accessories that come into contact with ink must be disposed
of in an environmentally-friendly manner according to local regulations.
This includes, among other things:
– Ink and ink waste
– Cleaning cloths
– Protective gloves
– Air filters
– Refill tanks
– Ink filters
Information on proper disposal of Durst inks can be found on the data

sheet for media safety contained in the ink refilling set or which can be
obtained from Durst Phototechnik AG.
B Safety
17 / 91