Illumination Brightness Control - Subaru FORESTER 2012 Quick Reference Manual

H
Remote control mirror switch
I
Illumination brightness control
J
Manual transmission (if equipped)
4
Some functions are available on certain models. For detailed operating and safety information, please consult your Owner's Manual.
Ignition switch must be in ACC or ON position.
1
To select mirror, press either end of switch
L for the left, R for the right.
To adjust the mirror, push switch
2
To adjust brightness of the information display and instrument panel
illumination, turn dial.
If the displays are too dim for legibility, turn dial fully upward to position.
dimming function will be cancelled.
1
,
2
in direction of desired movement.
To change gears, fully depress the clutch pedal, move
the shift lever, and gradually let up on the clutch
shift into reverse gear.
Rear-­view camera (if equipped)
When the ignition switch is ON and the shift lever is
set to R, the rear-­view camera automatically displays
the rear-­view image from the vehicle.