D
Headlights / turn signal
1
Even if the ignition key is removed from the ignition switch, the lights can be illuminated by turning the
light control switch position from OFF to
To prevent the battery from discharging, make sure that the light control switch is turned to OFF before
leaving the vehicle.
E
Fog lights (if equipped)
F
Windshield wiper and washer
3
G
Rear window wiper and washer
2
3
3
or
To turn on, rotate dial to
Fog lights operate only when headlight switch is in
However, the front fog lights turn off when the headlights are switched
to high beams.
2
4
1
Wiper
To operate, rotate knob to the following positions:
INT: Intermittent
When you subsequently move the selector lever (AT) or the shift lever
(MT) to the R position, the rear wiper will switch to continuous operation.
ON: Continuous
Washer
1
Headlights
To turn on, rotate knob to the following positions:
: Parking lights, instrument panel illumination,
tail lights, front side marker lights and licence plate
lights are on.
: Headlights are on.
2
High/low beam change
To change to high beams, push lever forward.
To return, pull back to original position.
3
Turn signal
Move lever up or down.
.
.
1
Wiper
To operate, push lever down to the following positions:
First click /
: Intermittent
Second click / LO: Low speed
Third click / HI: High speed
2
Single wipe (MIST)
To operate once, pull lever back.
3
Intermittent interval
To change interval speed, turn dial.
4
Washer
.
FORESTER
position.
3