Hyundai Azera 2005 Owner's Manual page 171

1
FEATURES OF YOUR HYUNDAI
154
M465B01TG-GAT
1. POWER ON-OFF Control Knob
The radio unit may be operated when
the ignition key is in the "ACC" or "ON"
position. Press the knob to switch the
power on. The LCD shows the radio
frequency in the radio mode, the tape
direction indicator in the tape mode or
CD track in either the CD mode or CD
AUTO CHANGER mode. To switch the
power off, press the knob again.
VOLUME Control
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
2. BAND Selector
Pressing the button changes the
AM(MW, LW), FM1 and FM2 bands.
The mode selected is shown on the
display.
3. TUNE Select Knob
Rotate the knob clockwise to increase
the frequency and turn the knob coun-
terclockwise to reduce the frequency.
4. Adjustment mode
select(A.MODE) Button
Pressing the A. MODE button changes
the BASS, MIDDLE, TREBLE, FADER
and BALANCE mode. The mode se-
lected is shown on the display.
After selecting the each mode, rotate
the VOLUME control knob clockwise or
counterclockwise.
BASS Control
To increase the BASS, rotate the knob
clockwise, while to decrease the BASS,
rotate the knob counterclockwise.
MIDDLE Control
To increase the MIDDLE, rotate the
knob clockwise, while to decrease the
MIDDLE, rotate the knob counterclock-
wise.
TREBLE Control
To increase the TREBLE, rotate the
knob clockwise, while to decrease the
TREBLE, rotate the knob counterclock-
wise.
FADER Control
Rotate the control knob clockwise to
emphasize rear speaker sound (front
speaker sound will be attenuated).
When the control knob is turned coun-
terclockwise, front speaker sound will
be emphasized (rear speaker sound will
be attenuated).
BALANCE Control
Rotate the knob clockwise to empha-
size right speaker sound (left speaker
sound will be attenuated). When the
control knob is turned counterclock-
wise, left speaker sound will be empha-
sized (right speaker sound will be at-
tenuated).
5. SEEK Select Button (Auto-
matic Channel Selection)
Press the SEEK select button. When
the ( ) side is pressed, the unit will
automatically tune to the next higher
frequency and when the ( ) side is
pressed, it will automatically tune to the
next lower frequency.