Error Code / Message - Panasonic CF-U1 Series Reference Manual

Error Code / Message

Follow the instructions below when an error message or code appears. If the problem persists or if the error code/message is
not shown here, contact Panasonic Technical Support.
Error Code/Message
Bad System CMOS
System CMOS Checksum
Error
Invalid Year. System date
restored to 01/01/2008
Press <F2> to enter setup
Solution
An error has occurred in the memory of system settings. This occurs when the memory con-
tent is changed by an unexpected program operation, etc.
Start the Setup Utility and return the settings to the default values, and then change the
settings as necessary.
If the problem persists, the internal clock battery may need to be replaced. Contact Pana-
sonic Technical Support.
The date and time settings are not correct.
Start the Setup Utility and set the correct date and time.
If the problem persists, the internal clock battery may need to be replaced. Contact Pana-
sonic Technical Support.
Write down the error details and press Fn + U (F2) or Fn +
Utility.
Change the settings if necessary. ( page 59)
72
(Del) to start the Setup