Bosch SHEM78WH5N Operating Instructions Manual page 13

Settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory
settings.
Change the setting as follows:
Open the door.
1.
Switch on On/Off switch (.
2.
Press Info button 8 for
3.
3 seconds until the following text
is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )R until
4.
the required setting is displayed.
Setting
Time setting
Time format
Time display
Language
Water hardness
Rinse aid disp.
Sensor setting
Extra dry
Eco forecast
Auto Power Off
Front display
Start Programme
Tone volume
Button volume
Wi-Fi
Factory setting
12:00
24h
Time
American English
°E0-8 Soft
Level 5
Standard
Off
Off
Off
On
Auto 45-65 °C
Level 2
Level 2
on/off
Make the selection with setting
5.
buttons + - X.
Press and hold the Info button
6.
8 for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
When you reset your
Note:
dishwasher to the factory settings,
you are taken directly to the settings
for switching on the dishwasher for
the first time.
Infotext
by pressing Info button
Set the current time.
12h or 24h.
Show end of wash cycle with display "Time" or "In
hours".
Language selection.
Setting water hardness. When using Multitabs, select
the lowest setting.
Amount of rinse aid affects drying. When using
Multitabs, select setting 0.
Adjusting water clarity detection for best cleaning
results.
Improved drying for glasses and plasticware.
Show the water and energy consumption.
Appliance automatically switches off at end of rinsing
process.
The front display can be selected.
When switching on, the last selected wash cycle
appears.
Volume of signal at end of wash cycle.
Volume when using buttons.
Switch wireless network connection on or off.
Getting Started en-us
13