Getting Acquainted; Getting Acquainted Unpacking; General Guide; Opening The Terminal Panel Cover - Casio QV-10 Owner's Manual

Getting Acquainted

This part of the manual contains information on unpacking, the
names of controls and components, and power supply information. It
also has sections that cover basic operations to let you begin enjoy-
ing the QV-10 as quickly as possible.
Unpacking ........................................................... 14

General Guide .................................................... 15

Operation Reference .......................................... 18

To record an image ............................................................. 18

To view images stored in memory ...................................... 19
To delete images stored in memory ................................... 20
Function Reference ........................................... 21
Record Functions ................................................................ 21
Playback Functions ............................................................. 23
Power Supply ..................................................... 25
To load batteries ................................................................. 25
Using AC Power ................................................................. 30
General Guide
The following illustrations show the names of each component, but-
ton and switch on the camera.
Top and Display
DISP (Display) button
/PROTECT
(Timer/Protect)
button
ZOOM button
LCD
POWER switch
Lens
Lens
Aperture switch
13
MODE button
DEL (Delete) button
Shutter button
[+] (Forward)
button
[–] (Reverse)
button
Function switch
NORMAL/MACRO switch
15
Unpacking
Getting Acquainted
Check to make sure that all of the items shown below are included
with your QV-10. If something is missing, contact your dealer as soon
as possible.
QV-10
Cleaning Cloth
Wrist Strap
• See page 17 for instal-
lation instructions.
14
Getting Acquainted
Bottom
Battery compartment cover
BRIGHT (brightness) control
• BRIGHT control adjusts the brightness of the image on the LCD.
The brightness is set at the factory to the optimum setting, and nor-
mally does not need adjustment. Use BRIGHT control to make ad-
justments after replacing batteries, or any other time you feel the
LCD image brightness is too dark or too light.
Terminals
AC Power terminal

Opening the Terminal Panel Cover

2 2 2 2 2
1 1 1 1 1
Important!
Make sure that the terminal panel cover is slid fully away as shown in
step 2 above before trying to raise it. Forcing the cover up can seri-
ously damage it.
16
Soft case
Alkaline batteries (AA-size × 4)
Special video cable
Manual and warranty
AC adaptor AD-C60
Tripod hole
Battery
compartment
lock
Terminal panel cover
VIDEO OUT terminal
DIGITAL terminal
3 3 3 3 3