Samsung HW-K950 User Manual page 15

Accessories for Wall-mounting
Bracket-Wall Mount {2 EA)
Holder-Screw (2 EA) Screw (2EA)
CTYP£ :700mm
Wall Mount Guide
1.
Place the
Wall Mount Guide
against the wall
surface.
The
Wall Mount Guide
must be level.
If your TV is mounted on the wall, install the
Soundbar at least 2 inches (5 em) below the
TV.
2 inches or more
2.
Align the Paper Template's
Center Line
with the
center of your TV (if you are mounting the
Soundbar below your TV), and then fix the
Wall
Mount Guide
to the wall using tape .
...; If you are not mounting below a TV, place the
Center Line
in the center of the installation area.
-- 1
CTYP£ :700mtn
I
Center Line
3. Push a pen tip or sharpened pencil tip through the
center of
the C-TYPE
images on each end of the
Guide to mark the holes for the supporting
screws, and then remove the
Wall Mount Guide.
4. Using an appropriately sized drill bit, drill a hole in
the wall at each marking .
...; If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the holes
before you insert the support screws. If you use
anchors or mollies, make sure the holes you drill
are large enough for the anchors or mol lies you
use.
CTVP£ 700mm
5. Push a screw (not supplied) through each
Holder-Screw,
and then screw each screw
firmly into a support screw hole.
6.
Install 2
Bracket-Wall Mounts
in the right
orientation on the bottom of the Soundbar, using
2
Screws
(M4 x L 12). (See page 15)
· 14 · English