Connecting An External Device; Installing The Wall Mount - Samsung HW-K950 User Manual

CONNECTING AN EXTERNAL DEVICE
External
Device
HDMI Cable
HDMI Cable
Bottom of the
Sound bar
1.
Connect an HDMI cable from the
HDMIIN 1 or HDMIIN
2 jack on the back of the product to the HDMI OUT
jack on your digital device.
2.
Press the
c:g]
button on the right side of the Soundbar or the
SOURCE
button on the remote control to
select
HDMI1 or HDMI2.
3.
The selected HDMI mode is displayed on the Soundbar display panel and sound plays.
INSTALLING THE WALL MOUNT
You can use the wall mount bracket to mount this unit on a wall.
Installation Precautions
• Install on a vertical wall only.
• For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight
of the set.
• Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install
the unit on a different wall that can support the unit's weight.
• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron
board, wood, etc.). If possible, fix the support screws into wall studs.
• Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar
on.
- Diameter: M5
-Length: 1 3/8 inches or longer recommended.
• Connect cables from the unit to external devices before you install it on the wall.
• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
· 13 · English