Miraclebox 9 HD Twin PVR User Manual page 71

 In case of S2 + S2
[ TUNER 1 ]
1. LNB IN (Caution : Socket on the left bottom)
Satellite broadcasting signal input socket for the first tuner
(TUNER 1). Connects a satellite antenna LNB cable.
2. LNB OUT
Satellite broadcasting signal output socket through the
first tuner (TUNER 1). Connects to a second tuner (TUNER
2) for loop-through.
[ TUNER 2 ]
3. LNB IN (Caution : Socket on the right bottom)
Satellite broadcasting signal input socket for the second
tuner (TUNER 2). Connects a satellite antenna cable or from the first tuner (TUNER 1) LNB OUT
connector.
4. LNB OUT
Satellite broadcasting signal output socket through the second tuner (TUNER 2). Connects to another
STB for loop-through.
 In case of T(T2) + T(T2)
[ TUNER 1 ]
1. ANT IN
Terrestrial broadcasting signal input socket for the first
tuner (TUNER 1). Connects an aerial antenna.
2. LOOP OUT
Terrestrial broadcasting signal output socket through the
first tuner (TUNER 1). Connects to second tuner (TUNER 2)
for loop-through.
[ TUNER 2 ]
3. ANT IN
Terrestrial broadcasting signal input socket for the second
tuner (TUNER 2). Connects a aerial antenna cable or loop-
through cable from the first tuner (TUNER 1).
4. LOOP OUT
Terrestrial broadcasting signal output socket through the second tuner (TUNER 2). Connects to
another STB for loop-through.
 In case of C + C
[ TUNER 1 ]
1. CABLE IN
Cable broadcasting signal input socket for the first tuner
(TUNER 1). Connects a cable antenna.
2. CABLE OUT
Cable broadcasting signal output socket through the first
tuner (TUNER 1). Connects to second tuner (TUNER 2) for
loop-through.
[ TUNER 2 ]
3. CABLE IN
Cable broadcasting signal input socket for the second
tuner (TUNER 2). Connects a cable antenna or loop-
through cable from the first tuner (TUNER 1).
4.
CABLE OUT
Cable broadcasting signal output socket through the second tuner (TUNER 2). Connects to another
STB for loop-through.
11