Miraclebox 9 HD Twin PVR User Manual page 103

2.4 Time Setting

Time Setting : To set the current time, you can use two
modes; Auto or Manual.

Local Offset : Enter the offset value by using the standardized
information of current service area.

Daylight Saving : If you want to apply daylight saving, select
the counter by using the ARROW buttons.

Clock Mode : Select the type of clock display(12 Hours or 24
Hours) using ARROW buttons.

Wake Up Mode : Enter the time for the receiver to
automatically power ON. And you can choose one of Wake Up Mode as 'off' or 'Once' or 'Daily' or
'Weekly'.
- Wake Up Date : Select the date when the STB is turn on. Press the OK button to display calendar.
- Wake Up Days : Select a day of the week when the STB is turn on.
- Wake Up Time : Enter the wake up time of the STB using the NUMERIC buttons.
- Wake Up Service : Select the service when the STB is turn on. Press the OK button to display the
service list.
 Sleep Mode : Enter the time for the receiver to automatically switch OFF and go to standby mode.
And you can choose one of the Wake Up Mode as 'off' or 'Once' or 'Daily' or 'Weekly'.
- Sleep Date : Select the date when the STB is turn off. Press the OK button to display the calendar.
- Sleep Days : Select a day of the week when STB is turn off.
- Sleep Time : Enter the turn-off time of the STB using the NUMERIC buttons.
2.5 Language Setting

Menu Language : Select the desired menu language by using the ARROW buttons.
NOTE : The menu and operation languages can be changed depending on the country sold.
Available languages are subject to change without prior notice.

Audio Language : Select the default language for the audio
when changing services. If no other language is provided,
then the default language of current will be automatically
selected.

Subtitle Language : Select the default language for subtitle
when changing service.

Teletext Language : Select the default language for Teletext.

User Font file : Select a font you want to use.
NOTE : To show and use the User Font, please install a desired font file(*.ttf) to the
/Var/Font directory(folder) in your PC which is connected with your receiver(STB)
by network. Then press LEFT/RIGHT button to select a font and press OK button.
43