Hardware Description - Miraclebox 9 HD Twin PVR User Manual

Hardware Description

1. Front Panel Configuration
1. POWER BUTTON : Press to switch between STANDBY and POWER ON modes.
2. Vol Up/Down BUTTON : Press to change audio volume in normal mode or to navigate menu in
menu mode.
3. CH Up/Down BUTTON : Press to change services in normal mode, or to move highlighted-bar in
menu mode.
4. Remote Sensor : Receives signal from remote controller.
5. VFD Display : The VFD consists of 12-digit letter. These letters display the current status of receiver
such as service name, service information and so on.
6. USB (Front) : Use it when connecting to external USB storage device.
7. SMART CARD READER : Insert smart card for encrypted service access.
8. PCMCIA : To receive other pay-tv service you need a CA-Module(Viaccess, Irdeto, Nagravison, etc.)
and a smart card from the service provider.
2. VFD(Vacuum Fluorescent Display)
1. Remote Indication LED : The LED lights on when a
key on the Remote Controller is pressed.
2. Information : Display information including service
name and other information.
9