Monitor Adjustments - Raw Thrills Super Bikes Operator's Manual

Basic Display Adjustments
WARNING:
Extremely high voltage is present on the monitor assembly. The monitor does not contain any
user serviceable parts. Do not attempt to service the monitor.
The following are display settings, which you should become familiar with. It is important to note that settings may
differ slightly between manufacturers and even between displays of the same manufacturers. Certain factors like
age of the display could also be a factor. Therefore, the information below should only serve as a reference as
actual settings may not be practical in most cases.
Setting
Function: Background Brightness or Black Level.
Brightness
Set Level: Black background should appear dark and not gray.
Function: Definition/ Sharpness of character against background.
Contrast
Set Level: Outer edges of character or text should not be distorted.
Function: Horizontal Position. Side/side centering.
H-Position
Set Level: Picture should be centered from side to side.
Function: Horizontal Size. Side/side dimension.
H-Size
Set Level: Picture should be full from side to side.
Function: Vertical Position. Up/down centering.
V-Position
Set Level: Picture should be centered up and down.
Function: Vertical Size. Up/down dimension.
V-Size
Set Level: Picture should be full from top to bottom.
Function: Degree of straightness along both vertical sides of the picture.
Pin Cushion
Set Level: Both sides of the picture should be straight, without curvature.
Function: De-magnetizes the picture tube when activated. This eliminates
Degauss
picture discoloration caused by magnetic disturbance around the picture tube.
Digital displays are adjusted using a button type remote adjust board. Below are functional diagrams for Neotec
and Wells Gardner 27" digital displays:
Neotec Remote
MENU
SEL(-)
EXIT
Wells-Gardner Remote
DOWN UP
The Fast and the Furious Super Bikes • Copyright 2006 • Raw Thrills Inc • All rights reserved
LED
SEL(+)
SELECT MODE
Adjustment
Menu: Open display adjustment menu.
Sel(-): Move down.
Move up.
Sel(+):
Exit: Save changes and exit.
Down: Move down.
Up: Move up.
Choose setting to adjust.
Select:
Mode: Exit to adjustment menu.
April 26, 2006
.
40