Factory Restore Menu; Calibration Menu - Raw Thrills Super Bikes Operator's Manual

Factory Restore Menu

From the Utilities Menu, select Factory Restore and enter. Performing Factory Restore will restore game
adjustments back to its manufacturer recommended settings and clear all audit information. The game will need
to be re-calibrated. Press Start to Select. Use Shift lever or press Service to Exit.
Really Perform Factory Restore?
Yes
No
Cancel
Press Volume +/- or View/Tunes to Select.
Press Test or Start to Activate
Press Service or Shift to Exit

Calibration Menu

From the Test Main Menu, select Calibration and enter. Making sure that the seat and Throttle are properly
calibrated is the easiest way to make sure that your motorcycle game can maximize its earning potential. Follow
the screen instructions carefully. Verify proper calibration on the Switch Test screen. Check and make sure that
the minimum, center and maximum values correspond to the actual position of the control.
The Fast and the Furious Super Bikes • Copyright 2006 • Raw Thrills Inc • All rights reserved
Utilities
Please note the
following:
Setting default
adjustments or
performing a factory
restore will require
calibration
afterwards.
A factory restore will
perform all the resets
listed at the left,
clearing credits,
audits, high scores,
and player data.
Calibration
Lean seat to center; then hit Test/Start
Lean seat left; then hit Test/Start
Lean seat right; then hit Test/Start
Roll Throttle and release; Then Hit
Test/Start
Roll Throttle and release; Then Hit
Test/Start
Hit Test/Start to Exit
Note:
• If the game requires constant re-
calibration, check the controls for
mechanical wear or damage.
Replace if necessary.
• Normal wear and tear of the
controls means that calibration
should be part of the games
scheduled maintenance.
April 26, 2006
.
35