Bios Power Management Setting - Raw Thrills Super Bikes Operator's Manual

Power Management Setting(BIOS)
NOTE:
Abrupt power cycling of the game should be avoided! Allow 5-10 seconds between turning the game
OFF and then ON again.
Fast and Furious Super Bikes is shipped with the correct BIOS settings. Any changes made to the BIOS other
than what is described below may adversely affect game functionality
This BIOS setting allows the PC to automatically power up when AC power is detected. This
eliminates the need to manually turn the PC ON after a power disruption.
Procedure:
1. Turn game OFF.
2. Connect a PS/2 or USB keyboard to the PC.
3. Hold the DELETE key while turning the PC ON.
4. On the BIOS menu screen, use the DOWN arrow to scroll down to Power
Management Setup. Hit ENTER key once.
5. On the Power Management Setup menu, use the DOWN arrow to scroll down to After
AC Power Lost.
6. Use the (+) button to change After Power Lost setting to: [Power ON].
7. Hit F10.
8. Hit Enter to Save and Exit.
9. PC will reset and begin to load game.
Please note that due to the PC power supply's safety feature which protects against damage
due to power disruptions, it may be necessary to remove AC power from the game for a period
of 5-10 seconds before the power supply becomes operational again.
The Fast and the Furious Super Bikes • Copyright 2006 • Raw Thrills Inc • All rights reserved
.
April 26, 2006
.
39