Front Electronics Board Setup - Preston Ability BREEZE-C Maintenance Manual

Front Electronics Board Setup

6.
The Horns can be setup to work in one of the follows options :
Controller alarms, Tiller push button , Reverse alarm , Blinkers
alarms.
The front board include setup options for the Horn. This can be
done with the dipswitch DSW1 that is on the front board.
Deep switch :
Dip Switches Setup is as follows : (Shown the Default Set Up)
State
"1" = Off
"2" = On
"3" = Off
"4" =
" " 1
" " 2
Diagram sketch :
User Modes setup with relate to user needs.
Description
Horn while blinker or hazard are on .
Horn while derive backward
When the battery too low – the scooter stop.
No use.
"3"
8