Ordering Information, Specifications; Information Related To Electromagnetic Compatibility (Emc) - Empi Direct Tens User Manual

Direct TENS
™

8. ORDERING INFORMATION, SPECIFICATIONS...

Ordering Information
Electrodes used up?
Questions about the product?
We at DJO would be happy to help!
To avoid wrong deliveries, please indicate the part
numbers when ordering products:
Part Number Product
42190 Electrodes, Square 5x5 cm Durastick, Wire, pkg. of 4 electrodes
42191 Electrodes, Rectangular 5x9 cm Durastick, Wire, pkg. of 4 electrodes
193068-100 Lead wire, 100cm (40 inches)
To reorder, please contact:
DJO France
Centre Européen de Fret
64990 Mouguerre
France
Phone: +33 (0)5 59 52 86 90
Fax: +33 (0)5 59 52 86 91
E-mail: sce.cial@DJOglobal.com
Internet: www.DJOglobal.eu
8.1. Information related to electromagnetic
compatibility (EMC)
The Direct TENS™ is designed to be used in typical
domestic or clinical environments and approved
according to the EMC safety standard of EN 60601-1-2.
This device emits very low levels in the radio frequency
(RF) interval and is therefore not likely to cause any
interference with nearby electronic equipment (radios,
computers, telephones etc.).
The Direct TENS™ is designed to withstand foreseeable
disturbances originating from electrostatic discharges,
mains supply magnetic fields or radio frequency
transmitters (such as mobile telephones).
For more detailed information regarding electromagnetic
emission and immunity, please contact DJO.
Specifications
Number of channels
Constant Voltage
Output Intensity
Maximum Output
Waveform
Frequency Range
Impluse Duration
Power Supply
Current consumption
for 1 channel, 200 µs
impulse duration, 100 Hz
and 40 V
Ambient conditions
(operation)
Ambient conditions
(storage, transport)
Dimensions (HxWxD)
Weight
2
Up to a resistance of 1000
ohms
0...60, adjustable in 0.5
steps
40 mA @ 1000 ohms, 250
μs
Asymmetrical biphasic
square impulse
0,5 – 1000 Hz
Determined by intensity
setting, 0 – 250 μs
2 x 1.5 V AA disposable
batteries
or
2 x 1.2 V AA rechargeable
batteries
50 mA
Temperature 10°C to 40°C
Relative humidity 30...75
%, no condensation
Atmospheric pressure 700
to 1060 hPa
Temperature 10°C to 40°C
Relative humidity 30...75
%, no condensation
Atmospheric pressure 500
to 1060 hPa
110 x 70 x 30 mm
165 g (including batteries)
Supplied by EME Services Ltd
24