Battery Life Management Via The Sdk - Code CR4300 User Manual

15.0 - Battery Life Management via the SDK

The FlexTest application demonstrates three power management methodologies for the CR4300. These would need to be implemented by the
application developer, and are basically three different ways of controlling the video stream to balance performance and battery consumption.
The options are:
• Maximum Performance: this setting keeps the video stream on constantly. This gives the snappiest performance, but also drains
the battery the fastest. After 30 minutes, the video stream will timeout and will turn back on upon next trigger (soft or hard scan
button press).
• Standard: this setting pulses the video stream. This gives median performance.
• Battery Saving: this setting initiates the video stream upon button press. An iOS limitation causes a delay of up to 500 ms before the
video stream will actually start, which may give the perception of slow performance.
If...
iPhone Battery Status
Any level
Any level
D027635_02 CR4300 User Manual
Sled Battery Status
15%
Greater than
Less than
15%
Then...
Sled
WILL charge the iPod/iPhone
WILL NOT charge the iPod/iPhone
11