General Information - HomeMatic HmIP-BPS Installation And Operating Manual

General information

matic, MAX! Heating Control or FS20). The suitable de-
vices can be mounted easily and without any tools on the
power supply unit.
Device overview (see figure 1+2):
(A)
Connecting terminals
(B)
Spring latches
(C) Battery compartment contact
4 General information
This device is a component of the Homematic IP smart
home system and can be combined with all devices in the
dimension of 55 x 55 mm (see sec. "5 Start-up" on page
25). Also battery operated devices in the dimension of
55 x 55 mm of other systems (e.g. Homematic, MAX! or
FS20) can be used with the power supply unit.
The available functions provided by the system in
combination with other components are described in
the Homematic IP User Guide. All current technical
documents and updates are provided at www.eQ-3.de.
eQ-3 AG hereby declares that this device com-
plies with the essential requirements and other rel-
evant regulations of Directive 1999/5/EC. You can find
the full declaration of conformity at www.eQ-3.de.
24