Function And Device Overview - HomeMatic HmIP-BPS Installation And Operating Manual

limiting class 3). Installation regulations according
to VDE 0100 and HD382 or 60364 have to be
considered. Users must be able to easily access
the cable protection switch. This must be marked
as disconnecting device for the actuator.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability. This also applies to
any conversion or modification work. The device
is intended for private use only.
The device may only be operated within residen-
tial buildings.
3

Function and device overview

The Homematic IP Power Supply Unit for brand switches
offers power supply for Homematic IP devices in the
dimension of 55 x 55 mm. The connected devices no
longer require batteries for operation.
The power supply unit for brand switches is easily inte-
grated into an existing installation using a flush-mounted
box. It is compatible with 55 mm devices of various prod-
uct lines and manufacturers (e.g. Homematic IP, Home-
Function and device overview
23