Table Of Contents - Beckett AF Manual

To the Owner:
Thank you for purchasing a Beckett
burner for use with your heating appliance.
Please pay attention to the Safety Warnings
contained within this instruction manual.
Keep this manual for your records and
provide it to your qualifi ed service agency
for use in professionally setting up and
maintaining your oil burner.
Your Beckett burner will provide years of
effi cient operation if it is professionally
installed and maintained by a qualifi ed
service technician. If at any time the burner
does not appear to be operating properly,
immediately contact your qualifi ed
service agency for consultation.
We recommend annual inspection/
service of your oil heating system by a
qualifi ed service agency.
Daily - Check the room in which your
burner/appliance is installed. Make sure:
Air ventilation openings are clean and
unobstructed
Nothing is blocking burner inlet air
openings
No combustible materials are stored
near the heating appliance
There are no signs of oil or water
leaking around the burner or appliance
Weekly
Check your oil tank level. Always
keep your oil tank full, especially
during the summer, in order to prevent
condensation of moisture on the inside
surface of the tank.
2
Contents
General Information .................................................... 3
Hazard Defi nitions ........................................................................
Remainder of manual to be used ONLY BY
▼
QUALIFIED SERVICE TECHNICIANS
Inspect/Prepare Installation Site ................................ 6
Inspect Chimney or Direct Vent System ........................................
Combustion air supply ...................................................................
Clearances to burner and appliance .............................................
Combustion chamber - Burner retrofi tting ...................................
Prepare the Burner ...................................................... 8
Low Firing Rate Baffl e ...................................................................
Burner fuel unit ..............................................................................
Attach air tube (if not already installed) .........................................
Nozzle and Pump Pressure ..........................................................
Install burner nozzle (if not already installed) ................................
Check/adjust electrodes ................................................................
Servicing nozzle line assembly .....................................................
Mount Burner on Appliance ....................................... 9
Mounting options ...........................................................................
Mounting dimensions ....................................................................
Check/Adjust 'Z' Dimension - 'F' heads ......................................
Installing the Oil Tank and Supply System .................................
Wire burner ................................................................ 13
Burner packaged with appliance ................................................
Burner installed at job site ..........................................................
Special wiring required with covered burners ............................
Burner Controls ......................................................... 14
GeniSys Model 7560 Control .....................................................
Features .....................................................................................
Wiring .........................................................................................
Reset Button Operation ..............................................................
Wire Burner ................................................................................
Start Up Burner/Set Combustion ............................. 17
Cad Cell Resistance Measurement ............................................
Resetting From Restricted or Hard Lockout ...............................
Startup / Checkout .....................................................................
Check Safety Features ...............................................................
Set combustion with instruments ...............................................
Perform Regular Maintenance.................................. 19
Shutting the Burner Off ..............................................................
Replacement Parts .................................................... 22
Limited Warranty Information .................................. 24
3
▼
6
7
7
7
8
8
8
8
8
9
9
9
9
10
12
13
13
13
14
14
14
16
17
17
17
18
18
18
19