Setting Up An Internet Connection (Canada); Selecting - Mercedes-Benz COMMAND Operating Instructions Manual

Setting up an Internet connection (Canada)

150
are connected with COMAND
R
fulfill the conditions for the Internet func-
R
tions
have not yet been set up for the Internet
R
function
To select a mobile phone from the device
X
list: turn the controller and press to con-
firm.
If the mobile phone supports the Blue-
®
tooth PAN profile or the USB classes
RNDIS, CDC/NCM or CDC/ECM, Internet
access is set up. You can use the Internet
functions.
If the connected mobile phone does not
support the named Bluetooth
the named USB classes, predefined
( page 150) or manual access data
Y
( page 150) must be set.
Y
Setting access data of the mobile
phone network provider
Selecting the predefined access data of
the mobile phone network provider
To select
X
press the controller.
A list of countries appears.
If the mobile phone network provider pro-
vides multiple access data options, the rele-
vant access data still has to be selected. This
depends on the data package used, for exam-
ple.
To check whether the predetermined dial-in
data corresponds with the dial-in data provi-
ded by your mobile phone network provider,
proceed as follows (
Manual
played.
The access data for the mobile phone net-
work provider is selected once for the mobile
phone connected and is loaded again each
time the mobile phone is connected. Estab-
lishing a connection (
You must set the access data of the mobile
phone network provider who provides the
SIM card and the associated data package
(access settings) for the connected mobile
phone. The access data remains the same
when you are in a different country (roaming).
®
profile or
The access data of another network is not
selected.
Manually setting the access data of the
mobile phone network provider
Predefined Settings: turn and
page 152) and select
Y
Settings. The access data is dis-
page 153).
Y