Displaying Details - Mercedes-Benz COMMAND Operating Instructions Manual

To select the message: turn and press the
X
controller.
The message is displayed.
To scroll through the message or select
X
phone numbers in the text: turn the con-
troller.
The display scrolls up or down line by line,
or skips to the next or previous telephone
number and automatically highlights it.
The following sub-folders can be selected
for text messages and e-mails:
Inbox
R
This folder contains all the incoming mes-
sages.
Outbox
R
This folder contains all the outgoing mes-
sages.
Drafts
R
This folder contains all the messages that
you have saved as a draft.
i
Folders cannot be selected if they are
empty.
Depending on the mobile phone used, the
sub-folder function may be available.
Read-aloud function for messages
To start the read-aloud function: press the
X
controller when the message is displayed.
To select Read Aloud: turn and press the
X
controller.
COMAND reads out the message.
To cancel the read-aloud function: press
X
the controller, select
Aloud Function and press the controller
again.
You can set the language (
speed ( page 41) of the read-aloud function.
Y
Displaying details and phone numbers
COMAND can also show a shortened sender
display in full.
Messages (text messages and e-mails)
Cancel Read-
page 45) and the
Y
To show the main function bar: slide 5
X
the controller.
To select Phone: turn and press the con-
X
troller.
The telephone menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select 1: turn and press the controller.
X
The message menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select Folder: turn and press the con-
X
troller.
To select Text Message
X
and press the controller.
The selected folder is displayed.
To highlight the desired message: turn the
X
controller.
To select G: slide 9 the controller.
X
To select Details: turn and press the con-
X
troller.
The detailed view appears.
To close the detailed display: slide 8
X
the controller.
Writing text messages
Writing a new text message
Observe the requirements for the message
function ( page 138).
Y
141
or E-Mail: turn
Z