Magnavox 19MDTR20 Service Manual page 270

Step
Starting
/Loc.
No.
No.
[32] [25] Loading Arm (SP) Assembly B
[33] [32] Loading Arm (TU) Assembly B
[34] [2], [25] M Brake (TU) Assembly
[35] [2], [25] M Brake (SP) Assembly
[36] [35] Tension Lever Assembly
[37] [36] T Lever Holder
[38] [34] Reel (TU)(D2)
[39] [38] M Gear
[40] [36] Reel (SP)(D2)
[41] [32], [36] Moving Guide S Preparation T
[42] [33] Moving Guide T Preparation T
[43] [19] TG Post Assembly
[44] [28] Rack Assembly
[45] [44] F Door Opener
[46] [46] Cleaner Assembly
[47] [46] CL Post
↓ ↓
(1) (2)
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as identification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T = Top, B = Bottom, R = Right, L = Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P = Spring, W = Washer, C = Cut Washer, S = Screw, * = Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
Part
DM2, DM14
DM2, DM14
T DM1, DM15
T DM1, DM15
T DM1, DM15
T DM15
T DM1, DM15
T DM1, DM15
T DM1, DM15
DM1, DM16
DM1, DM16
T DM1, DM16
R DM17
R DM17
T DM1, DM6
T DM6
↓ ↓
(3) (4)
Removal
Remove/*Unhook/
Fig. No. Unlock/Release/
Unplug/Desolder
*(P-7), Brake Belt
*(P-8)
*(L-12)
*(L-13)
*(P-9)
*(L-14)
↓
(5)
2-4-2
Installation
Adjustment
Condition
(+)Refer to Alignment
Sec.Page 2-5-1
(+)Refer to Alignment
Sec.Page 2-5-1
(+)Refer to Alignment
Sec.Page 2-5-1
↓ ↓
(6) (7)
N2466FTDA