Main Electrical Parts List
2-4. Assembly
1
1)Put the CON TO CON on the LCD Module
it clicks.
※ caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to damage the LCD Module.
3
1) Place the MIC as the picture below
※ caution
1) Be careful not to make scratch and molding
damage! TORQE (1.0 ± 0.1 Kgf·Cm)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Put the LCD Module into place as shown .
2) Put the speaker and motor into place.
※ caution
1) Be careful not to make scratch and molding
damage!
4
1) Put the MIC COVER and CREW
2) Attach KEYPAD
3) Press the KEYPAD not to be detached
※ caution
1) Be careful not to make scratch and molding
damage!
2-8