Safety Instructions - Sceptre C325B-144KN User Manual

SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15.
for PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
- 1 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
SAFETY INSTRUCTIONS
Never place a display set in an unstable location. A display set may fall, causing
serious personal injury or death. Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
1. Use only cabinets or stands recommended by the manufacturer of the display
set.
2. Use only furniture that can safely support the display set.
3. Make sure the display set is not overhanging the edge of the supporting
furniture.
4. Do not place the display set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the display set to a
suitable support.
5. Do not place the display set on cloth or other materials that may be located
between the display set and supporting furniture.
6. Make sure to warn and educate children about the dangers of climbing on
furniture to reach the display set or its controls.
7. Keep a minimum distance of 5 cm around all edges of the display for
sufficient ventilation.
8. The ventilation should not be impeded by covering the ventilation openings wi
th items, such as newspapers, table-cloths, curtains, etc. Install in accordance
with the manufacturer's instructions.
9. No naked flame sources, such as lighted candles, should be placed on the ap
paratus.
10. Operating environment: temperature: 5°C~35°C, Humidity: 10% to 85% non-
condensing, altitude: 0~2,000 m.
- 2 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual