Table of Contents
Advertisement
Controls
blower and air conditioner are completely
switched off and the air supply is cut off.
To switch on the air conditioner, set the de‐
sired air flow rate.
Switching cooling function on/off
The cooling function cools and
dehumidifies the incoming air be‐
fore reheating it as required, according to the
temperature setting. This function is only avail‐
able while the engine is running.
The cooling function helps to prevent conden‐
sation on the windows or to remove it quickly.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
Rear window defroster
The defroster switches off auto‐
matically after a certain time or
when the hardtop is opened.
Temperature
To increase the temperature, turn
the rotary switch clockwise to‐
wards red. For a lower tempera‐
ture, turn the rotary switch coun‐
terclockwise towards blue.
Defrosting windows and removing
condensation
1
Air distribution 1 in position
2
Deactivate recirculated air mode 2.
94
Climate
.
Online Edition for Part no. 01 40 2 957 378 - X/14
3
Switch on cooling function 3.
4
Temperature 4 to the right, red.
5
Set the air flow rate 5 to the maximum
level.
6
Switch on the rear window defroster 6 to
defrost the rear window
Ventilation
1
Use the lever to change the direction of the
air flow
2
Use the thumbwheels to smoothly open
and close the air vents
Ventilation for cooling
Adjust the vents to direct the flow of cool air in
your direction, for instance if the interior has
become too warm.
Draft-free ventilation
Adjust the vents to let the air flow past you.
Microfilter
The microfilter removes dust and pollen from
the incoming air. The microfilter is changed by
your service center during routine mainte‐
nance work.
.
Advertisement
Table of Contents
