Table of Contents
Advertisement
1.
Press button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa‐
nied by the time and the word "SET".
2.
Press button 2.
3.
Use button 1 to set the hours.
4.
Press button 2 to confirm the entry.
5.
Use button 1 to set the minutes.
6.
Press button 2 to confirm the entry.
7.
Press button 2.
The system accepts the new time.
Date
Setting the date
To set the dd/mm or mm/dd date format, for‐
mats and units of measure, refer to page 66.
1.
Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa‐
nied by the date and the word "SET".
2.
Press button 2.
3.
Use button 1 to set the day of the month.
Online Edition for Part no. 01 40 2 957 378 - X/14
Displays
4.
Press button 2 to confirm the entry.
5.
Set the month and the year in the same
way.
6.
Press button 2.
The system stores the new date.
Service requirements
Display
The remaining driving distance and the date of
the next maintenance are displayed briefly af‐
ter the ignition is switched on.
The current service requirements can be read
out from the remote control by the service
specialist.
The remaining driving distance or the due date
can be displayed individually for certain main‐
tenance procedures.
1.
Switch on the ignition.
2.
Press button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa‐
nied by the words "SERVICE INFO".
Controls
67
Advertisement
Table of Contents
