Table of Contents
Advertisement
Communications
▷
Bluetooth is activated in the vehicle and on
the mobile phone.
▷
Bluetooth presettings may need to be
made on the mobile phone, e.g., for a con‐
nection without confirmation or visibility,
refer to the mobile phone operating in‐
structions.
▷
A number with at least four and a maximum
of 16 digits was defined as the Bluetooth
passkey. It is only required once for pairing.
▷
The ignition is switched on.
Activating/deactivating Bluetooth
Bluetooth is not permitted everywhere.
To activate the connection:
1.
Switch on the radio ready state or the igni‐
tion.
2.
Press the button.
3.
"PHONE"
4.
"BT-ON"
To deactivate the connection again:
1.
"BT"
2.
"BT-OFF"
3.
"YES"
Pairing and connecting
Pairing the mobile phone
To avoid becoming distracted and pos‐
ing an unnecessary hazard both to your own
vehicle's occupants and to other road users,
only pair the mobile phone while the vehicle is
stationary.◀
1.
Switch on the radio ready state or the igni‐
tion.
2.
Press the button.
3.
"PHONE"
4.
"BT"
5.
"PAIR"
140
Telephone
Online Edition for Part no. 01 40 2 957 378 - X/14
Turn the right knob to display the Blue‐
tooth name of your vehicle.
6.
To perform additional steps on the mobile
phone, refer to the mobile phone operating
instructions: for instance, search for or
connect the Bluetooth device or a new de‐
vice.
The Bluetooth name of the vehicle appears
on the mobile phone display.
7.
Select the Bluetooth name of the vehicle
on the mobile phone display.
You are prompted by the radio or mobile
phone to enter the same Bluetooth pass‐
key.
8.
Enter the passkey on the mobile phone
and confirm it.
9.
"ADD"
10.
Enter the same passkey on the radio using
the function buttons and confirm it.
To delete the last digit: "DELETE"
11.
"OK"
Press twice if necessary.
If pairing was successful, the mobile phone ap‐
pears on the radio display.
Four mobile phones can be paired with the ve‐
hicle at once.
If pairing was unsuccessful: What to do if..., re‐
fer to page 141.
Repeating the pairing procedure/help
If pairing failed:
1.
"REPEAT"
2.
Repeat steps 6 to 10.
To display the Customer Relations phone
number: "CALLS"
Turn the right knob to display the Customer
Relations phone number and information
needed for pairing.
Advertisement
Table of Contents
