Selecting Record Mode - Philips HDD100 User Manual

Select your Recording Mode
1
If you want to make an analogue or digital line-in recording,
connect to your recording source to the
IN
jack on your Jukebox.
The recording source screen is automatically displayed.
To make a microphone recording, you will need to press
MENU/ HOLD
4
2
Use the
– Record Optical
– Record Line
– Record Mic
Record Mode
To start recording
During recording, the display shows a VU meter indicating the left
(L) and right (R) channel input levels, recording bitrate in Kbs,
recording source and track number, and the soft key controls for
Stop and Pause.
For Line-in and Optical
1
Use a connection cable (not supplied) to connect the
OPTICAL OUT/ LINE OUT jack on your audio recording
source to the
2
Press play on your connected audio source.
4
3
Press to start recording on your Jukebox.
For microphone recordings
4
Press to start recording on your Jukebox.
To pause and continue recording
2
Press to pause recording on your Jukebox. Press
resume.
To stop / end recording
1
1
Press to end recording on your Jukebox.
1
2 Press again to exit the recording function.
TIP:
– Recording is not possible when your Jukebox is connected via the USB.
– The remote control keys are disabled during recording mode.
26
to select the
3 2
or and controls to scroll and select your type of recording source:
for an Optical source
for a Line-in source
for built-in microphone source
screen is displayed.
OPTICAL/ LINE IN
OPTICAL /LINE
Record Mode
menu.
jack on your Jukebox.
4
again to