Basic Operation; Shutdown Mode; Switching On; Standby - Philips HDD100 User Manual

Shutdown mode

When you switch on the hdd100 for the very first time after charging, hdd100 starts up
from the shutdown mode. Shutdown mode is the default mode when:
– Battery power is very low
– Standby mode exceeds 250 hours
– hdd100 is brand new
– hdd100 has been reset.
For a fully charged battery. Actual time varies according to battery power at the time of
*
shutdown.
Switching on from shutdown
2;
Press for 1 second to switch on your hdd100.
opening screen appears followed by the Music
Library display.
Switching to standby
Standby mode is the power-saving mode and allows a fast wake-up.
2;
Press for 1 second to switch to standby.
TIP:
– You can charge Jukebox in standby mode. No charging indication appears. Charging
time is the same as for power shutdown or if Jukebox is switched on.
– By default, hdd100 automatically also switches to standby if no audio file is being
played and no controls are pressed after 2 minutes. If you like, you can adjust the
standby timer setting (see page 26).
Power Consumption during standby....................................... 8.7mW
Switching on from standby
2;
1 Press
for 1 second to switch on from standby.
If you were playing a track when you last switched off,
you will see the track stop icon 9 in the playback
screen upon wake-up.
2;
2 Press
again to start playback from standby mode.
*

Basic Operation

15