Power Supply; Charging Your Battery - Philips HDD100 User Manual

hdd100 operates on a built-in rechargeable battery (lithium polymer),
which you can charge up with the supplied multi-voltage adapter/
charger.When the battery is fully charged, hdd100 can play up to 10
hours on the move!

Charging your battery

1
Connect the supplied multi-voltage adapter/charger to the 5V DC jack on your
hdd100 and your power supply.
If hdd 100 is not switched on the battery will be charged in 4 hours, but no
indication appears on the display.
If hdd 100 is switched on,
battery is charging.
When the battery is fully charged,
2
Always disconnect the adapter if you are not charging the battery or not using
hdd100.
If hdd100 is switched on,
TIP:
– Battery charging time is the same irrespective of whether your hdd100 is in
standby or power shutdown mode.
– Recommended minimum charging time = 2 hours.
– Full charge = 4 hours.
– For a speedy alternative, you can also operate hdd100 by using the supplied 5V
power adapter as your external power supply.
indicates that the power adapter is connected and the
indicates hdd100 is now adapter operated.
appears when you disconnect the adapter.
Battery power level at full charge in
Music Library main screen

Power supply

13