Type A Machines 1 series Setup Manual page 2

TYPE A MACHINES
SERIES 1
CONNECT
Choose a Connection Type
• Via Direct Wi-Fi
If no known networks are found when Series 1 turns on, it creates a Wi-Fi network named "Series1-"
followed by 4 or 5 digit serial number on the printer's front. Join the network on your computer. NOTE:
Network can take a few minutes to appear. Windows requires Bonjour for this connection.
• Via Existing Wi-Fi Network
Once connected to the Series 1 directly via Wi-Fi, as described above, open a browser and type:
http://series1-XXXXX.local:5000
Replace "XXXXX
the interface. Click the Wireless icon in the top right to log in to your network and make the Series 1
available on your network.
• Via Ethernet Cable
Connect the Ethernet cable to the printer and then to a network router (required) and the printer will
automatically join the network when turned on.
Access the Series 1 Interface
Once connected via Wi-Fi or Network Router, open a browser and type: http://series1-XXXXX.local:5000
Replace "XXXXX
Tip: Bookmark this address for easy access in the future.
The Series 1
Interface
Status Indicators
A
Print status, errors, and progress status
Visualizer
B
3D model rendering and camera view
Wi-Fi Network Menu
C
Network selection & Access Point mode
Settings
D
General printer settings
Tabs
E
Files: File management and the Cone file
Temperature: Print head & heated bed
Control: Direct print head control & home
Terminal: Command-line interface
Timelapse: Timelapse video playback
" with the 4 or 5 digit serial number on the front panel, then press "enter" to access
" with the 4 or 5 digit serial number on the front panel, and hit enter to access interface.
00000
A B
E
C D
v3.1.2-524-07-11-16