Installation Of Indoor Unit - Midea MFA-12HRN1 General Information Manual

Installation of Indoor Unit

2. Installation of Indoor Unit
2.1 Service Space
The indoor unit should be installed in a location that meets the following requirements:
There is enough room for installation and maintenance. (Refer to the following figure )
The outlet and the inlet are not impeded, and the influence of external air is the least.
The air flow can reach throughout the room.
The connecting pipe and drainpipe could be extracted out easily.
There is no direct radiation from heaters.
Caution: Keep indoor unit, outdoor unit, power supply wiring and transmission wiring at least 1 meter away
from televisions and radios. This is to prevent image interference and noise in those electrical appliances.
(Noise may be generated depending on the conditions under which the electric wave is generated, even if
1 meter is kept.)
38
MCAC-UTSM-2009-03
Installation