Subscribe to Our Youtube Channel
Related Manuals for McIntosh TM1
Summary of Contents for McIntosh TM1
- Page 1 AM/FM Tuner Module Dealer Installation Guide McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549...
-
Page 2: Table Of Contents
MHT Series, C45, MR85 and other McIntosh Components. MX119, MX134 or MX135 Installation Instructions ..4 The TM1 Tuner Module is not a user installable product. It MHT Series Installation Instructions ........ 6 must be installed by the Technical Professionals at your C45 Installation Instructions .......... -
Page 3: Parts List
171405 Six conductor ribbon cable 171406 Four conductor ribbon cable 5 PinTerminal Connector Black TM1 Serial Number Label 1. N/C Green 2. N/C 3. Red Wiire 4. Black Wire AM/FM Tuner Module 5. Green Wire (Shield) - Page 4 MX119, MX134 or MX135 Removing Covers There is a TM1 Serial 1. Remove ALL connecting cables from the Rear Panel of Number Label at- the MX119, MX134 or MX135 tached to the outside Rear Panel Cover Screws A/V Controller. of the bag. Refer to Openings 2.
-
Page 5: Mx119, Mx134 Or Mx135 Installation Instructions
MX119, MX134 or MX135 Installation Instructions closest to the MX119, MX134 or MX135 Rear Panel. Refer to figure 7. Note: The six pin Cable Plug and PC Board Socket are “keyed” to attach only in one direction, do not Figure 9 force it on backward. - Page 6 Tuner and lifting up and away from the There is Module MHT Series Component. a TM1 4. Remove the Inside Connector Serial Figure 10 Cover which is secured with two Number Phillips Head Screws and is located on the Rear Panel.
-
Page 7: Mht Series Installation Instructions
SELECT Push-button on the Remote maining plug of the Control. The On-Screen Menu Item TUNER indicates Seven Conductor the current country setting of the TM1 AM/FM Tuner Cables from Ribbon Cable Module. If it needs to be changed to a different country... - Page 8 Refer to figure 21. 8. Locate the AM/FM Tuner Module in the anti-static bag. There is a TM1 Serial Number Label attached to the outside of the bag. Refer to figure 1 on page 3. Remove the label from the bag and attached it to the Rear Panel of the C45 below the opening labeled RAA1 AM ANT (DIN Connector).
-
Page 9: C45 Installation Instructions
C45 Installation Instructions Note: Refer to the C45 Owner’s Manual for additional four pin Socket of the Module, DIN Connector Operational Details. which is the middle one of the 18. Press the SETUP Push-button to enter the Setup Mode. three in-line connectors. 19. - Page 10 Cable Plug and 8. Locate the AM/ PC Board Socket Figure 29 FM Tuner Mod- Figure 32 are “keyed” to ule in the anti-static bag. There is a TM1 Serial Num- attach only in one direction, do not force it on backward.
-
Page 11: Mr85 Installation Instructions
MR85 Installation Instructions 13. In a similar fash- 18. Press and hold in the SPATIAL and MONO Push-but- ion, attach the tons until the Front Panel Alphanumeric Display indi- plug of the Four cates “SETUP V_.__ _. The character on the far right Conductor Ribbon AM/FM side of the Firmware Version Number display indicates... - Page 12 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. Printed in the U.S.A. McIntosh Part No. 04071604...
Need help?
Do you have a question about the TM1 and is the answer not in the manual?
Questions and answers