Driving Your Car And Adjusting Trim - XMODS 6000938 User Manual

Driving Your Car and Adjusting Trim

After you turn on both controller and car, squeeze the trigger to move forward and push
the trigger away from the handle to go in reverse.
If your car does not drive straight when you release the steering wheel, determine if the
car steers too far right or left, and then adjust the trim:
1. Turn off the controller, and then push the controller
trigger forward.
2. Turn on the controller; the LED indicator on the
controller flashes.
3. Keep the trigger held forward and turn the wheel to
the right or left to adjust the trim. If the car pulls to
the right, turn the wheel to the left. If the car pulls to
the left, turn the wheel to the right.
4. Release the trigger; the LED indicator stops flashing
and lights steadily.
• To avoid unintentionally adjusting the steering trim, do not operate the trigger or
steering wheel when you turn on the controller.
• To drive in reverse after braking, you may need to release the trigger to neutral briefly.
9
Reverse
Neutral
Drive