Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Flotec ergon 5000
Summary of Contents for Flotec ergon 5000
- Page 1 ® ERGON 5000 ,, 19 Manuale di uso e manutenzione pag. 1 Bedienungs - und Wartungsanleitung ,, 25 Use and maintenance manual Manual de uso y manutenciòn ,, 13 ,, 31 Bycnherwbb gj ecnfyjdrt Manuel d’utilisation et d’entretien b aeyrwbjybhjdfyb/...
- Page 2 98/37, 2006/95/CE, 2004/108/CE 98/37, 2006/95/CE, 2004/ 108/CE PENTAIR WATER ITALY Srl ART. via Masaccio, 13 ERGON 5000 56010 Lugnano - Pisa - ITALY Tel. 050/71.61.11 - Fax 050/70.31.37 HARMONIZED STANDARDS: EN 60335-2-41: 2003 + A1 EN 60335-1: 2002 +A1+A2+A11+A12 EN 61000-6-3...
- Page 3 Dear Customer, congratulations on your purchase of this product! As with all FLOTEC articles, this product has been designed in accordance with the most advanced technical principles and has been manufactured using the most modern and reliable electrical/electronic components. We recommend that you dedicate a few moments to carefully reading the following use instructions prior to using the apparatus for the first time.
-
Page 4: Chap. 2 Restrictions In Use
Protection against overload The FLOTEC ERGON range of pumps have an incorporated thermal motor protector. If there should be an overload the pump will stop. After cooling the motor will restart automatically. (For causes and relative remedies see troubleshooting point 3).The electrical... -
Page 5: Chap. 4 Functions
extension cables must not have a section inferior to 1.5 mm ² (H07 RN-F.) The plug and the connections must be protected from sprays of water. Please consult with your trusted specialised electrician. Chap. 4: Functions Operating characteristics - Constant pressure The system is composed of an electro-pump and an electronic control system that allows the constant pressure to be maintained in the system, reducing or increasing the rotation speed of the electro-pump motor depending on the water requirement. -
Page 6: Chap. 6 Starting Up
Remove the plug from the plug hole Warning! Empty operating of the pump. Before starting fill the pump and the suction tube The FLOTEC ERGON automatic electro-pump range is not self-priming and cannot start without the suction tube being filled with water... -
Page 7: Chap. 7 Maintenance And Troubleshooting
Before carrying out any maintenance operation disconnect the electro-pump from the electric power supply. Under normal conditions the FLOTEC ERGON electro-pump range does not require maintenance. To prevent possible setbacks we recommend periodically controlling the pressure supplied and the current absorption. A lessening of the pressure is a symptom of wear on the electro-pump. - Page 8 Possible setbacks Possible cause Remedy 1) DISPLAY IS EMPTY Led "LINE" off. No power supply. Check the voltage and that the plug is inserted well. Led "LINE" on. Display is broken or Contact customer service interruption in the electrical connections of the card Direct exposure...
Need help?
Do you have a question about the ergon 5000 and is the answer not in the manual?
Questions and answers