Related Manuals for Focal FSP-8
Summary of Contents for Focal FSP-8
- Page 1 FSP-8 ® Processeur Audio 8 canaux Manuel d’utilisation / User Manual / Gebrauchsanleitung / 使 用 手 册 Français : page 6 English : page 15 Deutsch : seite 23 中文：第31 Notice_FSP-8.indd 1 20/01/17 12:24...
- Page 2 FSP-8 Processeur Audio 8 canaux / 8-Channel Digital signal processor Notice_FSP-8.indd 3 20/01/17 12:24...
- Page 3 FSP-8 Processeur Audio 8 canaux / 8-Channel Digital signal processor M a n u e l d ’ u t i l i s a t i o n / U s e r m a n u a l Notice_FSP-8.indd 4...
- Page 4 • Keep the volume at a low level to be able to hear outside noises while driving the vehicle. Failure to do so may cause an accident. • Do not open the FSP-8, or make any modifications to the product. Failure to do so may cause an accident, a fire or an electric shock.
- Page 5 • Do not assemble in very humid or dusty places. Avoid installing the FSP-8 in places with high levels of humidity or with an excessive presence of dust. Humidity or dust getting inside the product may cause a technical malfunction.
- Page 6 Where to install your FSP-8 Due to the power of the FSP-8, heat dissipation is required for correct operation. This is why the FSP-8 must be placed in a well-ventilated area. Do not cover your FSP-8 as this may cause overheating.
- Page 7 (windscreen wipers etc.). In this case, connecting the REM input is not essential as the FSP-8 is equipped with a DC detection system on the high-level inputs. This function is not available on the AUX and OPTICAL inputs.
- Page 8 Information on connecting the additional AUX input The FSP-8 is equipped with an additional low-level AUX input. This enables the user to connect a second stereo source (such as a smartphone or a digital audio player) for example. It can be selected using the FSP-8 manager software or using the optional remote control.
- Page 9 CAUTION The cable connecting the positive (+) battery terminal to the ‘B+’ terminal on the FSP-8 MUST be fused (ampere rating: 3 amperes) at less than 15" (40cm) away from the vehicle’s battery. It must comply with the recommendations given in section 3.1.
- Page 10 (fig. H) REM: the REM connector connects the source (head unit) to the FSP-8 via a REM or REMOTE output on the head unit. This enables the FSP-8’s automatic power on function when the source (head unit) is turned on.
- Page 11 U s e r M a n u a l 5 – Duration of use of the FSP-8 Avoid using the FSP-8 for extended periods of time without starting the vehicle. This may cause the battery to go flat prematurely.