Advertisement
FSP-8
8-Channel Digital signal processor
U s e r M a n u a l
• Wire the connections correctly. Make sure you use the appropriate wire gauge and type of cable.
Failure to do so may cause a fire, injury and/or material damage to your FSP-8.
• Do not use nuts or fasteners part of the steering or braking systems for ground connection. The
fasteners and nuts used for the brake and steering systems (or any other security system) as well as the
various storage tanks must never be used for grounding. Using such parts as a ground may deactivate
the vehicle's control system and cause a fire or other technical problems.
• Keep all small objects which could be swallowed, such as nuts and screws, out of the reach of children.
Swallowing such objects may cause serious injuries. If swallowed, seek medical advice.
• Before beginning the installation, disconnect the negative battery terminal to avoid any risk of injury,
fire or material damage. Before beginning to wire up your product, remove the vehicle's negative (-)
battery terminal. (fig.A)
• Prolonged listening at high volumes, over 110dB, can cause long-term damage to your hearing.
Listening at volumes over 130dB, even for short periods of time, can cause permanent damage to
your hearing.
• Stop operation in the event of a problem. Failure to comply with this precaution may cause injury or
material damage to your FSP-8. If a malfunction persists, return the FSP-8 to your Focal dealer for repair.
• Use the accessories specified and be sure to install them correctly. Only use the accessories specified
in the user manual, and those which are supplied in the packaging. The use of other components could
cause internal damage to the equipment, or it may not be correctly installed. The parts used may become
loose and cause damage or a technical malfunction of the equipment. Failure to do so may cause an
accident, a fire or an electric shock.
• Do not assemble in very humid or dusty places. Avoid installing the FSP-8 in places with high levels of
humidity or with an excessive presence of dust. Humidity or dust getting inside the product may cause
a technical malfunction.
Notice_FSP-8.indd 16
16
20/01/17 12:24
Advertisement
