Advertisement
base and tube asseMbly
• Take the base and tube parts from the packing box
and loosen the four joint screws.
• Fix the tube on the base plate by the joint screws.
oPeratIon
The power switch is incorporated in the speed control
switch on the top of the fan.
0 - The fan is switched off.
1 - The fan operates at the lowest speed.
2 - The fan operates at the medium speed.
3 - The fan operates at the highest speed.
• The fan can operate in either oscillating or static
mode.
• To make the fan head oscillate, push down the
oscillation knob.
• To stop the fan head from oscillating, pull-up the
oscillation knob.
• The head of the fan can be adjusted up or down.
To do this loosen the adjusting knob, adjust the fan
to the desired angle, then secure by tightening the
adjusting knob.
cleanInG
1. Be sure to unplug the fan from the electrical supply
before cleaning.
2. Plastic parts should be cleaned with a damp cloth
or sponge using a mild soap solution. Thoroughly
remove soap with clean water.
3. To disassemble each part, reverse the order of
assembly.
WarnInG
• Read the operation instructions carefully.
• To reduce the risk of electric shock and injury to
persons, make sure unit is switch to the "off" position
and unplugged from the electrical outlet before
cleaning.
• Do not leave the fan running unattended.
• If the electric cord is damaged, it must be replaced
by the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard.
saFe oPeratIon
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to persons including:
1. Never insert fingers, pencils or any other object
through the grill when the fan is running.
2. Disconnect fan from the electric supply when moving
from one location to another.
3. Disconnect fan from the electric supply when
removing grills for cleaning.
4. Be sure the fan is on a stable, even surface when
operating to avoid overturning.
5. Do not use fan by a window. Rain may create an
electrical hazard.
6. Do not leave the fan running adjacent to an area
where water has been collected to avoid the
potential of electrical hazard.
7. Do not leave the appliance running or operable in
a place where young children might have access to
without supervision.
user Guide
Advertisement
