Hitachi R-S42CMJ How To Use Manual page 49

Draw the door fully, and draw the Slimline
1
slide case and the Slide case respectively.
When installing it, insert the pins on the left/right of the Lower freezer case into the
square holes on the frame to install it.
Moreover, hitch the pins on the left/right of the Slide case to the outside of the Lower
freezer case.
■ How to install the slide door
Ice Compartment/Upper Freezer
● Lift up the door pocket while tapping
the left/right of its bottom surface, and
remove it. (It is fi xed a little tightly.)
Insert the door pocket fully to the end when
installing it.
Ice Compartment/ Upper Freezer
● Draw the door fully and lift up the case
towards you.
Insert the left and right pins (four pins) of the
case into the square leg hole on the frame to
install it.
Lower Freezer
Pin
Frame
Door pocket
Frame
Lift up the Lower freezer
2
case.
Frame
Vegetable Compartment/Lower Freezer
Tap
Tap
Frame
49