Kenmore 253.7034 Use & Care Manual page 38

Before You Call
Concern Potential Cause
Water/Moisture/Frost Inside Refrigerator
Moisture • Weather is hot and humid.
collects on
inside of
• Flipper mullion
refrigerator
walls.
Water • Vegetables contain and
collects on give off moisture.
bottom side
of drawer
cover.
Water • Washed vegetables and
collects in fruit drain while in the
bottom of drawer.
drawer.
Water/Moisture/Frost Outside Refrigerator
Moisture • Weather is humid.
collects on
outside of
refrigerator
or between
doors.
Food in Fresh Food Compartment
Food is • Temperature setting is too
freezing. low.
• Temperature sensor is
covered by food (right side
of fresh food area).
• Food is covering the air
ports.
Common Solution
• The rate of frost buildup and internal
sweating increases.
• Adjust flipper mullion. (See "To adjust
the flipper mullion" in the Installation
section.)
• It is not unusual to have moisture on
the bottom side of the cover.
• Move humidity control (some models)
to lower setting.
• Dry items before putting them in the
drawer. Water collecting in bottom of
drawer is normal.
• This is normal in humid weather. When
humidity is lower, the moisture should
disappear.
• Move the setting to a higher degree.
• Allow space for air flow to the sensor.
• Allow space between the air ports and
the food.
38