Table of Contents
Advertisement
8. To remove wind guide assembly.
1) Remove a screw for earthing.
2) Remove a screw which secure the wind guide assembly.
3) Draw forward the wind guide assembly.
4) Pull the fan from the motor shaft.
5) Remove two screws which secure the motor shaded pole.
6) Remove the motor shaded pole.
7) Reverse the above steps for reassembly.
9. To remove H.V.transformer.
1) Remove four screws holding the H.V.transformer.
2) Remove the H.V.transformer.
3) Reverse the above steps for reassembly.
17
Advertisement
Table of Contents
