Table of Contents
Advertisement
Replacing the card reader
Attention
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
2
Remove the computer cover. For details, see
3
Remove the front bezel. For details, see
4
Pivot the drive bay assembly upward. For details, see
downward.
5
Disconnect the card reader cable from the system board.
6
Replace the card reader.
Caution
1
7
Connect the card reader cable to the system board.
8
Reinstall the removed parts and computer cover, and then reconnect the cables. For details,
see
Completing the parts replacement.
Replacing field-replaceable units (FRUs)
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Replacing the front bezel.
Touch only the edges of the card reader. Do not touch the card reader's circuit
board.
Removing the computer cover.
Pivoting the drive bay assembly upward and
2
39
Advertisement
Table of Contents
