Keyclick; Touchpad; Advanced Key Lock - SanDisk Sansa Fuze+ Manual

Rockbox firmware manual
Hide thumbs Also See for Sansa Fuze+:
Table of Contents

Advertisement

Chapter 8. General Settings

8.5.5. Keyclick

This menu controls key clicks on button presses.
Keyclick. This setting controls how strong the keyclicks are. If set to Off, the keyclicks
will be disabled.
Keyclick repeats. This setting turns keyclick repeats On and Off. If set to On, the
keyclicks will be repeated when you hold down a button. If set to Off, you will
hear only one click.

8.5.6. Touchpad

These settings control the functions of touchpad devices.
Touchpad Sensitivity. This setting controls the amount of pressure needed to register
a touchpad press. If set to 25 the lightest touch will register. If set to -25 a firmer
press will be needed to register on the touchpad.
Touchpad Deadzone. This setting controls the size of a configurable deadzone where
touch events between virtual keys are ignored. If set to 0 there is effectively no
deadzone. If set to 100 the deadzones between each virtual button are set to a
maximuim 400px.

8.5.7. Advanced Key Lock

This option allows users to select actions that when within WPS or FMS will not be
blocked by the key lock (software hold switch).
Enabled. Enables/disables the feature.
Settings. Allows to select actions that will not be blocked by the key lock.
Volume. Volume up/down.
Play. Toggling Play/Pause.
Seek. Seeking in a track.
Skip. Skipping of a track.
Autolock On. When the backlight turns off, softlock will lock the screen, activates when
you press the lock key and if you manually lock again, while active it then
disables autolock.
– (Lock Button Pressed #1) >Auto Lock On (device still unlocked till
– (Lock Button Pressed #2) >Auto Lock Off (device locked).
– (Lock Button Pressed #3) >(device unlocked).
Disable Touch. Blocks touch screen buttons like the original.
The Rockbox manual
backlight timeout).
(version 3.14)
77
Sansa Fuze+

Advertisement

Table of Contents
loading

Table of Contents