Table of Contents
Advertisement
Chapter 6. Sound Settings
to just one of the speakers. Many people will find such records tiring to listen to using
earphones and no crossfeed effect.
Crossfeed has the following settings:
Crossfeed. Selects whether the crossfeed effect is to be enabled or not.
Direct Gain. How much the level of the audio that travels the direct path from a speaker
to the corresponding ear is supposed to be decreased.
Cross Gain. How much the level of the audio that travels the cross path from a speaker
to the opposite ear is to be decreased.
High-Frequency Attenuation. How much the upper frequencies of the cross path audio
will be dampened. Note that the total level of the higher frequencies will be a
combination of both this setting and the Cross Gain setting.
High-Frequency Cutoff. Decides at which frequency the cross path audio will start to
be cut by the amount described by the High-Frequency Attenuation setting.
Most users will find the default settings to yield satisfactory results, but for the more
adventurous user the settings can be fine-tuned to provide a virtual speaker placement
suited to ones preference. Beware that the crossfeed function is capable of making the
audio distort if you choose settings which result in a too high output level.
The Rockbox manual
(version 3.14)
57
Sansa Fuze+
Advertisement
Table of Contents
