Initial Setup From The Meter - CONTOUR NEXT ONE User Manual

Initial Setup from the Meter

Press and hold the OK button for 2 seconds until the meter turns on.
The screen displays the Power On Self Test.
All symbols on the screen and the white strip port briefly light up. It is
very important to verify that 8.8.8 displays fully and that the white light
from the test strip port is visible.
If there are missing characters or if the strip port light is a color other
than white, contact Diabetes Care Customer Service. This may affect
the way you see your results.
Initial Setup begins with View Pre-Set Target.
View Pre-Set Target
8
OK Button
The meter displays a pre-set Overall
Target Range. You can change
this pre-set Target Range from
the C D app after
ONTOUR IABETES
initial setup.
To move to the next screen, press
the OK button. Continue to
Set the Time.
GETTING STARTED
Set the Time
1. To change the hour, press the
C N ONE blood glucose monitoring system
®
ONTOUR EXT
The hour is blinking.
button on the outer ring.
or
Outer Ring
2. To set the hour and move to
minutes, press the OK button.
3. To change the minutes, press
the or button on the outer
ring, then press the OK button.
For a 12-hour format, select AM
or PM, press the or button,
then press the OK button.
Continue to Set the Date.
9