CONTOUR NEXT ONE User Manual page 12

1. Remove the endcap from the lancing device.
14
2. Loosen the round protective cap
on a lancet by rotating the cap
¼ turn, but do not remove the cap.
3. Insert the lancet firmly into the
lancing device until the lancet
comes to a complete stop.
C N ONE blood glucose monitoring system
®
ONTOUR EXT
TESTING
4. Twist off the round protective
lancet cap. Save the cap for
disposing of the used lancet.
5. Replace the endcap.
6. Rotate the endcap dial to adjust
the puncture depth.
The amount of pressure applied
to the puncture site also affects
puncture depth.
15