Verify The Network Connection Status - Yamaha R-N303 Owner's Manual

Hide thumbs Also See for R-N303:

Owner's manual (63 pages)

Table Of Contents

Table of Contents

Connecting to a network

Use the cursor keys ( / ) to select desired

security method and press RETURN.

Settings

None, WPA2-PSK (AES)

If you select "None", go to step 10 below.

Note

If you select "None", the connection may be insecure since the

communication is not encrypted.

Use the cursor keys ( / ) to select

"Security Key" and press ENTER.

KEY

Use the cursor keys to enter the security key

on this unit, and press RETURN to previous

state.

Enter either 8 to 63 character string or 64

hexadecimal digits.

Use the cursor keys (/) to select a character and

the cursor keys (/) to move the edit position.

You can insert / delete a character, by pressing

PRESET i (insert) or PRESET j (delete).

Use the cursor keys ( / ) to select

"Connect [ENT]" and press ENTER to save

the setting.

The SSID and security key information is required

for setup of a mobile device.

When you select the "SSID" in Step 5, you can

display the SSID configured for this unit.

Configure the Wi-Fi settings of a mobile

device.

For details on settings of your mobile device, refer to

the instruction manual of the mobile device.

(1) Enable the Wi-Fi function on the mobile device.

(2) Select the SSID of this unit from the list of

available access points.

(3) When you are prompted for a password, enter the

security key displayed in Step 9.

If the Wireless Direct connection cannot be made, the

security key may be incorrect. Configure the Wi-Fi

settings of a mobile device again. You can verify

whether the unit is connected to a wireless network

(p. 18).

To exit from the menu, press SETUP.