Table of Contents
Advertisement
SAFETY
||
•
The integrated two-stage booster cushion is
set in the correct position according to the
child's height and weight
•
That the seat belt is properly positioned and
is taut.
•
The shoulder section of the seat belt is
across the child's collarbone, not over the
neck.
•
The lap section of the seat belt is across the
child's hips and not the abdomen.
•
The head restraint is set to same height as
the child's head so that, if possible, the entire
back of the child's head is covered.
US models
Stage 1
Weight
50 – 80 lbs
22 – 36 kg
Height
45 – 55 in.
115 – 140 cm
90
Canadian models
Weight
Height
18 kg (40 lbs) is the minimum weight require-
ment for a child using booster seats according to
the Canadian regulation CMVSS 213.4.
Related information
•
Seat belts (p. 62)
•
Child safety (p. 77)
Stage 2
•
Raising the integrated booster cushion*
33 – 55 lbs
(p. 90)
15 – 25 kg
•
Stowing the integrated booster cushion*
(p. 92)
37 – 47 in.
95 – 120 cm
Stage 1
Stage 2
22 – 36 kg
18 – 25 kg
50 – 80 lbs
40 – 55 lbs
115 – 140 cm
102 – 120 cm
45 – 55 in.
40 – 47 in.
Raising the integrated booster
cushion*
The integrated booster cushions in the rear
seat's outboard positions must be correctly
raised before use.
An Integrated booster cushion in the rear seat
can be folded up to two positions, depending on
the child's height and weight.
Lower position:
Pull the handle forward and upward to
release the booster cushion.
* Option/accessory.
Advertisement
Table of Contents
